ADA 101 – Rectangular Shower Seats
2010 ADAS 610.3.1 Rectangular Seats The rear edge of a rectangular seat shall be 2 1/2 inches maximum and the front edge 15 inches minimum …
ADA 101 – Shower Compartment Seats
2010 ADAS 610.3 Shower Compartment Seats Where a seat is provided in a standard roll-in shower compartment, it shall be a folding type, shall be …
ADA 101 – Spacing of Grab Bars
2010 ADAS 609.3 Spacing of Grab Bars The space between the wall and the grab bar shall be 1 1/2 inches. The space between the …
ADA 101 – Transfer Type Shower Compartments
2010 ADAS 608.2.1 Transfer Type Shower Compartments Transfer type shower compartments shall be 36 inches by 36 inches clear inside dimensions measured at the center …
ADA 101 – Alternate Roll-In Type Shower Compartments
2010 ADAS 608.3.3 Alternate Roll-In Type Shower Compartments In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the …
ADA 101 – Grab Bars in Standard Roll-In Type Shower Compartments
2010 ADAS 608.3.2 Garb Bars in Standard Roll-In Type Shower Compartments Where a seat is provided in standard roll-in type shower compartments, grab bars shall …
ADA 101 – Standard Roll-In Type Shower Compartments
2010 ADAS 608.2.2 Standard Roll-In Type Shower Compartments Standard roll-in type shower compartments shall be 30 inches wide minimum by 60 inches deep minimum clear …
ADA 101 – Bathtubs Clearance
2010 ADAS 607.2 Bathtubs Clearance Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches wide minimum. A …
ADA 101 – Bathtubs With Permanent Seats Control End Wall
2010 ADAS 607.4.1.2 Bathtubs With Permanent Seats Control End Wall A grab bar 24 inches long minimum shall be installed on the control end wall …