ADA 101 – Doors in Series and Gates in Series
ADAS 2010 404.2.6 Doors in Series and Gates in Series The distance between two hinged or pivoted doors in series and gates in series shall …
ADA 101 – Clear Width at Turn
2010 ADAS 403.5.2 Clear Width at Turn Where the accessible route makes a 180 degree turn around an element which is less than 48 inches …
ADA 101 – Walking Surface Slope
2010 ADAS 403.3 Walking Surfaces Slope The running slope of walking surfaces shall not be steeper than 1:20 (5%). The cross slope of walking surfaces …
ADA 101 – Walking Surfaces Clear Width
2010 ADAS 403.5.1 Walking Surfaces – Clear Width Except as provided in 403.5.2 and 403.5.3, the clear width of walking surfaces shall be 36 inches …
ADA 101 – Operable Parts
2010 ADAS 309.4 Operable Parts – Operation Operable parts shall be operable with one hand and shall not require tight grasping, pinching, or twisting of …
BlueDAG University – How to Create an Evaluation
Victor Felix, BlueDAG’s Director of Content and Accessibility, shows users how to create an evaluation in the BlueDAG portal.
ADA 101 – Vertical Clearance
ADAS 2010 307.4 – Vertical Clearance Vertical clearance shall be 80 inches high minimum. Guardrails or other barriers shall be provided where the vertical clearance …
ADA 101 – Vision Lights
2010 ADAS 404.2.11 – Vision Lights Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing …
ADA 101 – Door and Gate Surfaces
2010 ADAS 404.2.10 – Door and Gate Surfaces Swinging door and gate surfaces within 10 inches of the finish floor or ground measured vertically shall …